✓
TECHNICAL VALUES

APPLICATION

PREPARATION of the MORTAR

• A proper amount of water shall be put inside the mixing container (6-6.75 l water/25 kg bag).
• Powder material shall be added and stirred with a low speed hand mixer.
• After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
• One coat of mortar with 3 mm of thickness shall be applied by steel trowel on the panel which had been fixed on the wall.
• Reinforcement fiber mesh shall be placed by stretching it and without folding it, and the connection points of the mesh shall be overlapped. Net shall be applied with a steel trowel to ensure the contact of fresh mortar with the net.
• Second coat (2 mm) of plaster shall be applied after applying the plaster.
• A steel trowel is recommended to finish the surface. Sponge float may cause dusting of the surface.

1

2

3

⚠
RECOMMENDATION

• No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
• Plaster shall not be used again by mixing with water or dry plaster if its application time has expired.
• Surface shall be watered in specific intervals within 3 days after the application to ensure the strength of plaster depending on the weather conditions.
• We recommend that the application shall be performed between +5°C and +35°C.
• FINKOT® shall be protected against quick drying under windy weather conditions.
• It shall not be applied on frozen surfaces.
• Do not apply under direct sunlight.
• Do not go beyond the application field and the rules.
• Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
• For detailed information, please request the security data sheet.
• Contact us for your technical questions and for your questions about all other application conditions.