TM Nexport logo-light

WATERFiX®

Cement-Based Rapid Setting Water Insulation Material

Shock Setting Water Blocker

WATERFiX®
Categories


✓
APPLICATION FIELD

Used for repairing of stationary cracks on areas with an active water leak, and for repairing and filling of broken and perforated parts on concrete surfaces

+
REQUIREMENTS

  • Blocks the flowing water within a short period of time.
  • It may be easily and rapidly applied.
  • It is possible to perform cement-based application on it within an hour.
  • Contraction cracks do not occur.
  • Has a high mechanical strength.
  • Any type of water insulation material may be applied on it.

✓
TECHNICAL VALUES

Dry Bulk Density, kg/m³
1000±200
Application Time, minutes
1,0 – 1,5
Drying Time, min.
2,5 – 3,0

1 hour 1 day 3 days 28 days
Compressive Strength, N/mm² 7 12 15 20
Bending Strength, N/mm² 1 2 2,5 4,5




APPLICATION

PREPARATION of the MORTAR

  • A proper amount of powder (approximately 5 kg of WATERFIX® /1.4-1.5 l of water) shall be mixed with water and pugged.
  • Paste-like mortar obtained shall be used without waiting.
  • The hole in the application shall be extended to a size of 3×3 cm minimum to decrease water pressure.
  • Mortar shall be tapered by hand, and placed on the water leak area at a single time.
  • Keep applying constant pressure for 2 minutes at least until the material is hardened.
  • Surface shall be rapidly corrected with trowel after the material has hardened.
  • The procedure above shall be repeated from the sides to the centre for holes that are not possible to the closed at a single time.
  • It shall not be applied on brick and aerated concrete and surfaces with thin level of plaster.

1
WATERFIX Image 1

2
WATERFIX Image 2

3
WATERFIX Image 3

▶
APPLICATION VIDEO

For more information, please watch our application video.

📦
PACKAGING

5 kg plastic buckets

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

✓
CERTIFICATE OF CONFORMITY

TS EN 1504-3 / April 2008 Complies with R2 class.

TSE Logo

CE Logo

TCL Logo

×
Enlarged Image

Related products