✓
TECHNICAL VALUES

NOTE: Technical data are given for environments with a temperature of +23°C and a relative humidity of 50%.

APPLICATION

SURFACE PREPARATION

• Application surface shall be solid, free of any type of oil, grease, corrosion, paraffin, paint, bitumen residues and any loose parts shall be moved away.
• The surfaces to be applied with primer shall be free from dust and shall not contain errors such as dents, breaks and cracks, etc.
• Such uneven surfaces and corner edges shall be repaired with DOLTEK® repair mortars with a minimum radius of 4 cm before the application.
• If SUTOP® PU-1B shall be applied on absorbent surfaces such as concrete, precast concrete etc., it shall be primed with SUTOP® PRIMEL PU; and if shall be applied on bright non-absorbent surfaces such as ceramic, granite, marble, metal etc., it shall be primed with SUTOP® PRIMEL PU (SILAN).
• Wait at least for 3-4 hours to ensure that the primer has dried.
• Primer shall be applied to the surface by a roll, brush or sprayer.

PREPARATION of the MORTAR

• SUTOP® PU-1B that has been kept in room temperature for 24 hours is mixed with a mixer with a suitable mixer bit at 300-400 rpm until the mixture becomes homogeneous.
• The mixture obtained shall be applied to the primed surfaces as one coat or two coats using a thin comb, trowel, roll brush with short bristles or with a suitable sprayer.
• The layer shall protected against water rain, external factors and mechanical forces until it is dried.
• While the waiting period between application of coats varies as per the ambient conditions, the period to start the second coat is usually 12 hours.
• You shall consider that the waiting period may be reduced in hot weather and that it may be longer in cold weather.

1

2

3

📊
CONSUMPTION

Standard Use:

SUTOP® PRIMEL PU 0,20 kg/m² / SUTOP® PU-1B 0,75 – 1,00 kg/m² (for a single coat)

Reinforced Use:

SUTOP® PRIMEL PU 0,20 kg/m² / SUTOP® PU-1B 0,85 – 1,25 kg/m² (for a single coat)

Note: The values provided in our table are the average consumption values. Additional consumption shall be determined by the user according to different surface properties.

⚠
RECOMMENDATION

• Contains solvents, combustible.
• Water vapour pressure from the negative side shall not be observed on the application surfaces.
• After application, the surface shall be protected against water, rain, dew, snow, hail, etc. until it is dry.
• It shall not be applied in enclosed areas due to long-lasting solvent odour, and the surface temperature shall be +5°C.
• After the application, tools shall be cleaned with soapy water and thinner.
• The package shall be kept at +15°C for at least 24 hours during application.
• It should be considered that full mechanical and chemical strength shall be achieved in 7 days.
• Storage conditions shall be considered while it is transported.
• Work clothing, protective gloves and goggles conforming with the Occupational Health and Safety Rules shall be used during the application.
• Do not inhale it directly.
• Do not approach with open flames and do not smoke during application.
• Avoid contact with eye and skin. In case of contact, wash with plenty of water and soap.
• Consult a physician immediately in case of swallowing.
• Do not use empty packages to store food and do not throw them in fire.
• Food and drinks shall not be allowed in application areas.
• Shall be stored away from the children.
• Do not go beyond the application field and the rules.
• For detailed information, please request the security data sheet.
• Contact us for your technical questions and for your questions about all other application conditions.