SIVAMATiK PLUS

Cement-Based Light Machine Plaster

✓
APPLICATION FIELD

Applied on brick, aerated concrete, concrete, fair faced concrete, pumice concrete, briquette walls on the interior and exterior faces of the buildings.

It can be used for architectural work due to the capability of the plaster to be processed.

+
REQUIREMENTS

Suitable for thick applications, too. (Maximum 10 cm)
Capable to be processed, formed.
Provides a strong surface with high adhesive resistance and strength.
It can be easily and rapidly applied with a machine.
More resistant to water (hydrophobic) than a conventional plaster.
Lighter than the normal rough and fine plasters.
Offers high resistance against crack formation.
Allows ease of application and working with low loss rate thanks to its special additives.

✓
TECHNICAL VALUES

Maximum Grain Size, mm
2

Dry Bulk Density, kg/m³
800 ± 200

Compressive Strength, N/mm²
1,5 – 5,0 (CS II)

Adhesive Strength, N/mm²
≥ 0,3 (FP:B)

Capillary Water Absorption, kg/m².min0.5
W0

Average Thermal Conductivity, W/m.K (λ10,dry)
≤ 0,27

Reaction to Fire
A1

APPLICATION

SURFACE PREPARATION

The surface of application will always be free of form oil, dust, paint and materials that reduce adherence.
Repair of the cracks and holes should be made with the same material or using appropriate Entegre Repair Mortars before application.
Application surface should be dampened with water, if required.
Pre-coating should be performed using PRIMEL PLUS® on all surfaces 1 day before the application.
You can advance to application as soon as the surface is cured.

PREPARATION of the MORTAR

SIVAMATİK PLUS will be mixed (10-11 l water/25 kg bag) and sprayed to the surface with ready-mix plaster mixer and sprayer.
Application thickness should be between 1 cm and 10 cm in one coat.
Surface must be levelled.
The surface of the plaster should be polished when the plaster becomes hard enough and the surface shall be finished with a damp sponge.
If the surface should be formed, you may start the operation 2 hours after the application.

📊
CONSUMPTION

Approx. 10,0 kg/m² for 1 cm of plaster thickness

📦
PACKAGING

25 kg Paper Bag,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

6 Months Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) should be added to the prepared plaster.
We recommend the application to be performed between +5°C and +35°C.
SIVAMATİK PLUS will be protected against quick drying under windy weather conditions.
Fiberglass meshs or special meshs for the application field should be used on the joining areas of different materials and on the points that may be considered to be moving.
You shall wait at least 10 days for the application be performed on the SIVAMATİK PLUS depending on the ambient temperature.
Surface shall be watered in specific intervals within 3 days after the application to ensure its strength.
Do not go beyond the application surface and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the safety data sheet.
Contact us for your technical questions and for your questions about all other application conditions.