✓
APPLICATION FIELD

Applied on brick, aerated concrete, concrete, fair faced concrete, pumice concrete, briquette walls and ceiling surfaces of the interior faces of the buildings.

+
REQUIREMENTS

• Serves as both the rough plaster and finish plaster.
• Provides a strong surface with high adhesive resistance and strength.
• It can be easily and rapidly applied with a plaster machine.

✓
TECHNICAL VALUES

APPLICATION

SURFACE PREPARATION

• The surface of applications will always be free of form oil, dust, paint and materials that reduce adherence.
• Repair of the cracks and holes should be made with the same material or using appropriate Entegre Repair Mortars before application.
• Application surface should be dampened with water if required.
• Pre-coating will be performed using PRIMEL® for surfaces such as aerated concrete, bricks, etc. 1 day before the application; and using PRIMEL® PLUS for smooth surfaces such as fair faced concrete 1 day before the application.
• Start application after surface is prepared.

PREPARATION of the MORTAR

• SIVAMATIK® İÇ is applied with a plaster machine (9-11 liter water / 50 kg bag) and sprayed to the surface.
• Application thickness should be between 1 cm and 2.5 cm in one coat.
• If the thickness is more than 2.5 cm, a second coat is applied with max. of 2.5 cm thickness after the first coat is set.
• Surface must be levelled with plastering template.
• The surface of the plaster will be polished when the plaster becomes hard enough and the surface will be finished with a damp sponge.

▶
APPLICATION VIDEO

For more information, please watch our application video.

📊
CONSUMPTION

Approx. 14,5 kg/m² for 1 cm of plaster thickness

⚠
RECOMMENDATION

• No other materials (lime, cement, gypsum, etc.) should be added to the prepared plaster.
• Application is performed between +5°C and +35°C.
• SIVAMATIK® İÇ should be protected against quick drying under windy weather conditions.
• Fiberglass meshs shall be used on the joining areas of different materials and on the points that may be considered to be moving.
• Wait at least 10 days for applications to be performed on the SIVAMATIK® İÇ depending on the ambient temperature.
• Surface should be watered in specific intervals within 3 days after the application to ensure its strength.
• Do not go beyond the application field and the rules.
• Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
• For detailed information, please request the safety data sheet.
• Contact us for your further inquires and about all other application conditions.