Cement-Based Grout Mortar
It is used on cracked and worn concrete surfaces where manual operation is not possible, on broken concretes, for fixing of steel columns to the foundation, for the installation of prefabricated concrete structural elements, for securing all kinds of industrial machinery to the ground and for filling of holes and cavities.
| Property | 1 DAY | 7 DAYS | 28 DAYS |
|---|---|---|---|
| Bending Strength, N/mm² | ≥ 5 | ≥ 6 | ≥ 7 |
| Compressive Strength, N/mm² | ≥ 30 | ≥ 50 | ≥ 60 |
SURFACE PREPARATION
The surface of application shall be free of residues that may prevent adhesion.
Moving parts with low adherence shall be moved away from the surface.
Corrosion on metal parts shall be removed and contact with mortar shall be prevented using an anti-corrosion agent.
Absorbent surfaces shall be saturated with water.
Ensure that the mould where the application shall be performed is well cleaned and water-proof, and fix the mould securely.
Water collected on the surface shall be moved away before application.
PREPARATION of the MORTAR
Add powder material to the mixture water put inside a clean mixing vessel (3.5-4,0 l water/ 25 kg powder), and mix using a hand mixer with low speed at this time.
Mix 3-4 minutes more until a homogeneous mixture is achieved after adding all powder.
It shall be used in 15-20 minutes as it sets quickly.
The mortar prepared shall be applied with an injection pump or by self dissipation depending on the application.
Times specified may differ as per ambient temperature and surface temperature, and the times are reduced at lower temperatures and increased in higher temperatures.
Powder Consumption: 1.9 kg/l
25 kg Paper Bag, (delivered in pallets or as sling-bags upon request.)
6 Months Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)
TS EN 1504-3 / April 2008 Complies with R4 Class.
Ministry of Public Works Pos. No: 04.613/3C
