✓
TECHNICAL VALUES

APPLICATION

PREPARATION of the MORTAR

• Mortar prepared by hand or with a screed machine (3-3.5 l of water/25 kg bag; 6-7 l of water/50 kg bag) shall be spread on the surface and levelled with a thickness of 3-10 cm.
• When the surface is hardened, it shall be corrected with a mechanical finishing tool.

1

2

3

⚠
RECOMMENDATION

• No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
• Plaster shall not be used again by mixing with water or dry plaster if its application time has expired.
• Surface shall be watered in specific intervals within 7 days 24 hours after the application to ensure the strength of ŞAPSER® depending on the weather conditions.
• We recommend that the application shall be performed between +5°C and +35°C.
• We recommend you to use expansion joints with proper intervals for applications on very wide areas. (For areas greater than 25 m²)
• ŞAPSER® shall be protected against quick drying under windy weather conditions.
• It shall not be applied on frozen surfaces.
• Do not apply under direct sunlight.
• Do not go beyond the application field and the rules.
• Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
• For detailed information, please request the security data sheet.
• Contact us for your technical questions and for your questions about all other application conditions.