PRİMEL 606® BETOKONTAK

Adherence Enhancing Synthetic gross concrete undercoat applied before, Gypsum and Cement Based Plaster applications.

✓
APPLICATION FIELD

Resin-based, filled concrete primer with special polymer additives, used to increase surface adherence before gypsum and cement-based plaster applications on exposed concrete walls and ceilings.

+
CHARACTERISTICS

Enhances adhesion of plaster on concrete.
Prevents contraction cracks of plaster.
Prevents absorption of water content of plaster by the concrete.
Increases workable time of plaster.
Provides simplicity in use.

✓
TECHNICAL VALUES

Density, gr/cm³
~ 1650

Color
Pink

pH
7-9

Consistency
Bulky

Application thickness
Max. 2mm

Adhesion Strength (TS EN 1542:2001)
≥1,0 N/mm²

Drying time
60-120 minutes (20°C and 50% relative humidity)

APPLICATION

When used under plaster; 1/3 ratio:

1.6 kg Water / 5 kg PRIMEL 606® BETOKONTAK
4 kg Water / 12 kg PRIMEL 606® BETOKONTAK

These water ratios are maximum values. If necessary it can be used with higher density.

PRIMEL 606® BETOKONTAK is mixed with water by a mixer or a drill to obtain a fully homogeneous product. Mixing is repeated during the application.
PRIMEL 606® BETOKONTAK is applied on the surface by a roll.
When PRIMEL 606® BETOKONTAK has dried completely, plaster application can be done.

📊
CONSUMPTION

175 g/m²

📦
PACKAGING

Available in 12 kg bucket.

💾
STORING

Store in closed space away from direct sunlight.
1 year from the date of manufacture if stored in unopened original package, under dry, frost free conditions.

⚠
RECOMMENDATION

Recommended temperature range for application: +5°C to +35°C.
It must be used within 3 days after mixing with water. (Package should be kept tightly closed when not in use)
Substrate must be dry, clean and free of dust.
Packages should be protected against frost.
Wash all tools used with water after application.
Hazardous for health when ingested.
Keep out of reach of children.
Store in tightly closed container.
Avoid contact with eyes and skin.
Consult us for your questions related to all other application instructions and for your technical questions.