PRiMEL 600® BETOKONTAK

Adherence Enhancing Synthetic Resin Dispersion Primer

✓
APPLICATION FIELD

Used as adherence increasing primer on ceramic surfaces and fair faced concrete walls and ceilings.

+
REQUIREMENTS

Improves adhesive strength of the plaster.
Prevents contraction cracks of the plaster.
Used for priming applications on ceramics.
Increases the application time of plaster by preventing rapid loss of water.
Provides ease of application.
Allows savings from labour.

✓
TECHNICAL VALUES

Density, g/cm³
~ 1,5

Colour
Pink

pH
Between 7.0-9.0

Application Thickness, (mm)
Max. 3

Adhesion Strength, N/mm²
> 1,0

Drying Time, min.
60-120 (20 °C and 50% relative humidity)

Temperature Strength, °C
-20 °C – +80

APPLICATION

SURFACE PREPARATION

The surface shall be dry, clean and free of oil.

PREPARATION of the MORTAR

Shall be mixed at a ratio of 1/3 for flush applications:
- 1.6 Kg Water / 5 kg PRIMEL 600® BETOKONTAK
- 4 Kg Water / 12 kg PRIMEL 600® BETOKONTAK
At a ratio of 1/5 for applications over ceramics:
- 1 Kg Water / 5 kg PRIMEL 600® BETOKONTAK
- 2.4 Kg Water / 12 kg PRIMEL 600® BETOKONTAK
Specified water amounts are maximum values, and it may be used as thicker when required.
PRIMEL 600® BETOKONTAK and specified amount of water shall be mixed until the mixture becomes homogeneous.
Primer mixed with water shall be stirred from time to time during application. PRIMEL 600® BETOKONTAK is applied to the surface with a roll or a brush.
Plaster is applied when material is hardened so that it is not possible to scratch it from the surface with nail.

PRIMEL 600 BETOKONTAK Application Step 1

PRIMEL 600 BETOKONTAK Application Step 2

PRIMEL 600 BETOKONTAK Application Step 3

▶
APPLICATION VIDEO

For more information, please watch our application video.

📊
CONSUMPTION

200 g/m² (at a ratio of 1/3)
335 g/m² (at a ratio of 1/5)

📦
PACKAGING

1 kg plastic drums
5 kg plastic drums
12 kg plastic drums

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions, closed and away from direct sunlight

⚠
RECOMMENDATION

We recommend that the application shall be performed between +5°C and +35°C.
Shall be used within 3 days after mixing with water provided that its package is closed.
The application surface shall be dry, clean and free of dust.
It shall be protected from freezing.
All tools used shall be washed with water after application.
When inhaled, it is harmful to health.
Keep away from the children.
Keep it in a container that is closed tightly.
Avoid contact with eye and skin.
Contact us for your technical questions and for your questions about all other application conditions.

✓
CERTIFICATE OF CONFORMITY

TS 13744 / March 2017 / Class 1

Adhesion Increasing Primer With Filler Material