PRiMEL 300®

Organic Acid Based Joint Filler And Cement Stain Remover

Cement Stain Remover

✓
APPLICATION FIELD

Used for cleaning of the coatings that are contaminated with mortar, joint filler, cement-based construction waste on them and of the joints that are contaminated within time.

+
REQUIREMENTS

It is a combination of organic acids with surface active materials.

✓
TECHNICAL VALUES

No technical values provided.

APPLICATION

PRIMEL 300® Joint Filler and Cement Stain Remover shall be spread on the area to be cleaned with a brush.
After waiting for 3-5 minutes, cleaning should be started with a brush or sponge.
The dirty water formed in the cleaned area during the process should be removed.
The cloths and sponges used should be washed frequently with clean water and the cleaning process should be continued.
After the cleaning is completed, PRIMEL 300® should be applied on the stains with less dilution for the stain residues in the area.
After the process is completed, the entire area should be rinsed with plenty of water and wiped, then left to dry.
For cleaning stubborn residues, PRIMEL 300® Joint Filler and Cement Stain Remover should be applied without dilution with water and left on the stain for a longer period of time.

📊
CONSUMPTION

PRIMEL 300® / Water: Diluted at a ratio of 1/5;

Complete Ceramic Cleaning: approximately 50-80 gr/m²
Joint Cleaning: approximately 20 gr/m²

📦
PACKAGING

1 l Plastic Drums

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions

⚠
RECOMMENDATION

We recommend that the application shall be performed between +5°C and +30°C.
It shall be protected from freezing.
All tools used shall be washed with water after application.
When inhaled, it is harmful to health.
Keep away from the children.
Keep it in a container that is closed tightly.
Avoid contact with eye and skin.
Contact us for your technical questions and for your questions about all other application conditions.