ORANGE PACKAGE ® DECORATIVE COATING PLASTER

Mineral Based Decorative Coating Plaster

✓
APPLICATION FIELD

Cement based decorative coating material used as final coat on the exterior façades and thermal insulation systems of all buildings.

+
REQUIREMENTS

Provides high resistance against water and frost.
Has a natural and decorative appearance.
Applied easily.

✓
TECHNICAL VALUES

Shininess
No value required

Dry Film Thickness
> 400; E5

Grain Size, mm
> 1500 S4

Water Vapour Transmission Rate, g/(m².day)
V0

Water Transmission Rate, kg/(m².hour0.5)
W0

Crack Bridging
A0

CO2 Permeability
C0

Resistance To Mould Growth
K2

TS EN 1062-1
E5 S4 V0 W0 A0 C0 K2

APPLICATION

SURFACE PREPARATION

Application surface shall be dry, clean, free of dust and solid.
After at least 48 hours later than the TURUNCU PAKET® REINFORCEMENT PLASTER is applied (after the surface is dried completely), TURUNCU PAKET® DECORATIVE COATING PLASTER is applied to the surface.

PREPARATION of the MORTAR

A proper amount of water shall be put inside the mixing vessel (7-7.5 l water/25 kg of powder).
Powder material shall be added and stirred with hand mixer at low speed.
After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
The mortar prepared shall be applied on the surface at an equal thickness with a steel trowel.
Application thickness shall be adjusted considering the size of the largest grain in the material.
Pattern is applied on the surface with circular movements using a plastic or polyurethane trowel.
Ensure that the material is used without interruption on wide surfaces.

Decorative Coating Plaster Application Step 1

Decorative Coating Plaster Application Step 2

Decorative Coating Plaster Application Step 3

📊
CONSUMPTION

Fine Class Product: 2.5 kg/m²

Thick Class Product: 2.7 kg/m²

📦
PACKAGING

25 kg polyethylene-reinforced kraft paper bags,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
TURUNCU PAKET® DECORATIVE COATING PLASTER shall be applied at least 5 days (varies as per seasonal conditions) later than the application of the plaster.
Surface shall be watered in specific intervals within 3 days after the application to ensure the strength of plaster depending on the weather conditions.
We recommend that the application shall be performed between +5°C and +35°C.
TURUNCU PAKET® DECORATIVE COATING PLASTER shall be protected against quick drying under windy weather conditions.
It shall not be applied on frozen surfaces.
Do not apply under direct sunlight.
Do not go beyond the application field and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the security data sheet.
Contact us for your technical questions and for your questions about all other application conditions.