✓
APPLICATION FIELD

Used for fixing of ceramics and tile coating materials on horizontal and vertical surfaces for interior areas and on floor applications for exterior areas.

Applied on cement-based plasters on dry and medium wet areas, walls; and on cement-based screed and concrete flooring on floor areas.

+
REQUIREMENTS

• Prepared easily.
• Provides convenient application thanks to its adequate application and incrustation time.
• Applied on the surface easily.
• Used conveniently on interior surfaces both vertically and horizontally.

✓
TECHNICAL VALUES

APPLICATION

SURFACE PREPARATION

• The surface shall always be free of form oil, dust, paint and materials that reduce adherence.
• Repair of the cracks and holes shall be made using appropriate Entegre Repair Mortars before application.
• Application surface shall be dampened with water, if required. PRIMEL 100® shall be applied before application on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc. and the fixing operation is started when drying is complete (after approx. 24 hours).

PREPARATION of the MORTAR

• Water shall be put to the mixing vessel first, then KAROFIX® shall be added (5.75-6.25 l water/25 kg bag) and it shall be stirred until the lumps are removed.
• Stop for 5 minutes, and stir again to achieve a homogeneous mixture.
• The mortar prepared shall be applied up to a thickness of 8 mm, it shall be combed and ceramic shall be fixed.
• For a good adhesion, application shall be performed by applying force on the surface with a rubber hammer.
• Double sided fixing shall be used for coatings greater than 1,100 cm².

▶
APPLICATION VIDEO

For more information, please watch our application video.

📊
CONSUMPTION

Applies for application on a single side

⚠
RECOMMENDATION

• No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
• Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
• Wait until the ceramic adhesive is dried for joint application.
• Used for coatings with water absorption of > 0.5 (ceramic, tile, etc.).
• Coating areas specified below are suitable for an ideal application:
  • On interior floor: Area of ceramics ≤1200 cm²
  • On exterior floor ≤900 cm²
  • On interior walls: Area of ceramics ≤1100 cm²
• KAROFIX® White is recommended for light coloured coatings.
• We recommend that the application shall be performed between +5°C and +35°C.
• For an ideal application, coating material shall be fixed to the mortar applied on the surface within 25 minutes.
• It shall not be applied on frozen surfaces.
• Do not apply under direct sunlight.
• Do not go beyond the application field and the rules.
• Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
• For detailed information, please request the safety data sheet.
• Contact us for your technical questions and for your questions about all other application conditions.