INTEGRATED C30 READY-MIXED CONCRETE ®

C30-F6 Type Ready-Mixed Concrete

✓
APPLICATION FIELD

Used for repairing of holes, cracks and grooves of foundations, walls and floorings, for filling the holes and for making beams.

+
REQUIREMENTS

Applied easily.
High strength.
Used both on interior and exterior surfaces.
Allows application up to a thickness of 35 cm.

✓
TECHNICAL VALUES

Dry Bulk Density, kg/m³
2000 ± 200

Bending Strength, N/mm²
≥ 6

Compressive Strength, N/mm²
≥ 25

Grain Size, mm
Between 0-3

APPLICATION

SURFACE PREPARATION

The surface of application shall always be free of materials such as form oil, paint, dust etc.

Moving parts with low adherence shall be moved away from the surface.

You may advance to application after dampening the surface lightly.

PREPARATION of the MORTAR

A proper amount of water shall be put inside the mixing vessel (6 l water/50 kg bag).

Powder material shall be added and stirred with hand mixer at low speed.

After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.

The mortar prepared shall be applied up to a thickness of 35 cm.

IMAGES

INTEGRATED C30 READY-MIXED CONCRETE Image 1

INTEGRATED C30 READY-MIXED CONCRETE Image 2

INTEGRATED C30 READY-MIXED CONCRETE Image 3

CONSUMPTION

20 kg/m² for 1 cm of thickness

✓
PACKAGING

50 kg Paper Bag, (delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

(1 week after opening the package.)

✓
CERTIFICATE OF CONFORMITY

TS EN 13813

Complies with CT-C25-F6 Class.

✓
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
Do not exceed the recommended water amount.
Plaster shall not be used again by mixing with water or dry plaster if its application time has expired.
Surface shall be watered in specific intervals within 7 days 24 hours after the application to ensure the strength of INTEGRATED C30 READY-MIXED CONCRETE® depending on the weather conditions.
We recommend that the application shall be performed between +5°C and +35°C.
We recommend you to use expansion joints with proper intervals for applications on very wide areas. (For areas greater than 25 m²)
INTEGRATED C30 READY-MIXED CONCRETE® shall be protected against quick drying under windy weather conditions.
It shall not be applied on frozen surfaces.
Do not apply under direct sunlight.
Do not go beyond the application field and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the safety data sheet.
Contact us for your technical questions and for your questions about all other application conditions.