FiNEL® INSIDE

Cement-Based Final Coat Plaster

✓
APPLICATION FIELD

Used for obtaining a final coat surface on concrete surfaces and polished surfaces on the interior faces of the buildings.

+
REQUIREMENTS

Allows breathing of the surfaces.
Provides a smooth surface on the final coat.
It has a white colour.
It has polymer additives.

✓
TECHNICAL VALUES

Dry Bulk Density of Hardened Mortar, kg/m³
1200 ± 200

Compressive Strength, N/mm²
0,4 – 2,5 (CS I)

Adhesive Strength, N/mm²
≥ 0,15 (FP:B)

Capillary Water Absorption, kg/m² min0.5
W0

Water Vapour Permeability Coefficient (µ)
≤ 25

Average Thermal Conductivity (W/m.K)
≤ 0,43

Reaction to Fire
A1

APPLICATION

SURFACE PREPARATION

The surface of application will always be free of materials such as form oil, dust, paint, etc.
Moving parts with low adherence should be moved away from the surface.
You can advance to application after dampening the surface.
Precautions against dusting should be taken on plastered surfaces.

PREPARATION of the MORTAR

A proper amount of water will be put inside the mixing vessel (9-9,5 l water/25 kg bag).
Powder material will be added and stirred with hand mixer.
After resting for 5 minutes, the plaster should be stirred until achieving a homogeneous mixture.
The mortar prepared should be applied with a steel trowel.
Application thickness should be 2-3 mm.
It should be applied as two coats for thicker applications and the second coat should be applied when the first coat is set adequately.

📊
CONSUMPTION

1.2 kg/m² for 1 mm of thickness

📦
PACKAGING

25 kg Paper Bag,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
Plaster should not be used again by mixing with water or dry plaster if its application time has expired.
FINEL® INSIDE will be applied at least 7 days later than the application of the plaster.
We recommend the application to be performed between +5°C and +35°C.
FINEL® INSIDE will be protected against quick drying under windy weather conditions.
It should not be applied on frozen surfaces.
Do not apply under direct sunlight.
Do not go beyond the application field and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the safety data sheet.
Contact us for your technical questions and for your questions about all other application conditions.