FiNEL ® EXTERIOR

Cement-Based Final Coat Plaster

✓
APPLICATION FIELD

Used for obtaining a final coat surface on concrete surfaces and polished surfaces on the interior and exterior faces of the buildings. It has a grey colour.

+
REQUIREMENTS

Provides a smooth surface on the final coat.
It has polymer additives.
Can be used both on interior and exterior surfaces.
Resistant to water and freezing.

✓
TECHNICAL VALUES

Brightness
Mat; G3

Dry Film Thickness
> 400; E5

Grain Size, mm
< 1500; S3

Water Vapour Transmission Rate, g/(m².day)
15<V2≤150

Water Transmission Rate, kg/(m².hour0.5)
0,5≥W2>0,1

Crack Bridging
A0

CO2 Permeability
C0

Resistance to Mould Growth
K2

TS EN 1062-1
G3 E5 S3 V2 W2 A0 C0 K2

APPLICATION

SURFACE PREPARATION

The surface of application will always be free of materials such as form oil, dust, paint, etc.
Moving parts with low adherence should be moved away from the surface.
You can advance to application after dampening the surface.
Precautions against dusting should be taken on plastered surfaces.

PREPARATION of the MORTAR

A proper amount of water will be put inside the mixing vessel (7.5-8.5 l water/25 kg bag).
Powder material will be added and stirred with hand mixer.
After resting for 5 minutes, the plaster should be stirred until achieving a homogeneous mixture.
The mortar prepared should be applied with a steel trowel.
Application thickness should be 2-3 mm.
It should be applied as two coats for thicker applications and the second coat should be applied when the first coat is set adequately.

📊
CONSUMPTION

1.3 kg/m² for 1 mm of thickness

📦
PACKAGING

25 kg Paper Bag,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
Plaster should not be used again by mixing with water or dry plaster if its application time has expired.
FINEL® EXTERIOR will be applied at least 7 days later than the application of the plaster.
We recommend the application to be performed between +5°C and +35°C.
FINEL® EXTERIOR will be protected against quick drying under windy weather conditions.
It should not be applied on frozen surfaces.
Do not apply under direct sunlight.
Do not go beyond the application field and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the safety data sheet.
Contact us for your technical questions and for your questions about all other application conditions.