Cement-Based Ready-Mixed Glass Brick and Joint Filler Mortar
Used for masonry of glass bricks and filling of joints in all areas.
SURFACE PREPARATION
The masonry material shall always be free of form oil, dust, paint and materials that reduce adherence.
PREPARATION of the MORTAR
For the masonry mortar;
After adding a suitable amount of water and powder in the mixing vessel (7 l of water/20 kg of powder), it shall be stirred until the mixture becomes homogeneous using a hand mixer.
The mortar that is stirred again after resting for 5 minutes shall be applied to the glass brick at a thickness of 3-10 mm to perform the masonry work.
You may advance to joint application at least 24 hours later than the masonry work.
For the joint filler;
After adding a suitable amount of water and powder in the mixing vessel (7.5-8 l of water/20 kg of powder), it shall be stirred until the mixture becomes homogeneous using a hand mixer.
The mortar that is stirred again after resting for 5 minutes shall be applied with a rubber ended scraper.
After 45 minutes, surface shall be dampened with a damp sponge.
2 kg/m² for 8 mm joint thickness
25 kg polyethylene-reinforced kraft paper bags, (delivered in pallets or as sling-bags upon request.)
6 Months Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)
