TM Nexport logo-light

ALÇIPER®

Gypsum-Based Hand Plaster

Ease of Application

ALÇIPER®
Categories


✓
APPLICATION FIELD

Applied on brick, Aerated concrete, Concrete, Fair faced concrete, Pumice concrete, Briquette walls, Ceiling surfaces on interior faces of the buildings.

+
REQUIREMENTS

  • It can be easily applied thanks to its long application time.
  • Provides a strong surface with high adhesive resistance and strength.

✓
TECHNICAL VALUES

Compressive Strength, N/mm²
≥ 2,0
Bending Strength, N/mm²
≥ 1,0
Adherence Strength (Under Dry Conditions), N/mm²
≥ 0,1
Initial Setting Period, minutes
> 50
Reaction to Fire
A1




APPLICATION

SURFACE PREPARATION

  • The surface will always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.
  • Application surface should be dampened with water, if required. PRIMEL 600® BETOKONTAK is used for adherence increasing primer before application on bright fair faced surfaces, concrete ceilings and walls.
  • You can advance to application when the surface is cured.

PREPARATION of the MORTAR

  • Water will be put to the mixing vessel first, then ALÇIPER® should be added (17-18 l water/35 kg bag) and it should be stirred until the lumps are removed.
  • Stop for 5 minutes, and stir again to achieve a homogeneous mixture.
  • Application thickness should be between 8 mm and 2.5 cm in one coat. If the thickness is more than 2.5 cm, a second coat is applied in max. 2.5 cm thickness before the first coat is set.
  • The mortar prepared should be applied with a mortar board or a plastering trowel. Then, the surface must be levelled.
  • ALCIPER® and SATENPER® will be mixed and applied on the surface.
  • In order to finish the surface and prepare it for painting, the surface should be smoothed with a final coat of SATENPER® after the hardening of the surface.

1
ALCIPER Application Step 1

2
ALCIPER Application Step 2

3
ALCIPER Application Step 3

APPLICATION VIDEO

For more information, please watch our application video.

📊
CONSUMPTION

Approx. 10,0 kg/m² for 1 cm of plaster thickness

📦
PACKAGING

30 kg PP Bag,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

6 Months Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
  • We recommend the application to be performed between +5°C and +35°C.
  • ALCIPER® will be protected against quick drying under windy weather conditions.
  • We recommend using fiberglass meshs on the joining areas of different materials and on the points that may be considered to be moving.
  • You should wait at least 10 days for the application be performed on the ALCIPER® depending on the ambient temperature.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

✓
CERTIFICATE OF CONFORMITY

TS EN 13279-1 / February 2009 / B4-50-2.0

Ministry of Public Works Pos. No: 04.737/H

TSE Logo

CE Logo

TCL Logo

×
Enlarged Image

Related products