SURFACE PREPARATION

• The surface will always be free of form oil, dust, paint and materials that reduce adherence.
• Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.
• Application surface should be dampened with water, if required. PRIMEL 600® BETOKONTAK is used for adherence increasing primer before application on bright fair faced surfaces, concrete ceilings and walls.
• You can advance to application when the surface is cured.

PREPARATION of the MORTAR

• ALCIMATIK® should be mixed with ready-mix plaster mixer (15-16 l water/35 kg bag) and sprayed to the surface.
• Application thickness should be between 1 cm and 2.5 cm in one coat.
• If the thickness is more than 2.5 cm, a second coat is applied in max. 2.5 cm thickness before the first coat is set.
• Surface must be levelled.
• When the surface starts to be dried, excess parts on the surface may be removed with a second levelling operation.
• Then, compaction and smoothing is performed with a scraper.
• When the surface reaches the adequate hardness, it should be lightly dampened and smoothed with a sponge and satin surface should be removed.
• A perfect surface is achieved by finishing with steel trowel when the satin on the surface starts to be dried depending on the ambient temperature.
• After about 2 hours, the hardened surface will be lightly dampened and operation will be completed by finishing with steel trowel.

1

2

3

APPLICATION VIDEO

For more information, please watch our application video.