AKFiN MANTO

Cement-Based Polymer Reinforced Fine And Flexible Exterior Coating

✓
APPLICATION FIELD

Used for obtaining a smooth surface that is ready for final coat paint on concrete surfaces and polished cement-plastered surfaces, gypsum plaster, exterior coating plates and thermal insulation boards on the interior and exterior faces of the buildings.

White and grey colour options are available.

+
REQUIREMENTS

May be used on exterior surfaces safely thanks to its flexibility and water repellency.
May be applied for coating of exterior dry wall systems.
It has polymer additives.
Easy to apply.
Features air permeability.
Resistant to water and freezing.

✓
TECHNICAL VALUES

Appearance
Satin

Dry Film Thickness
> 400; E5

Grain Size, mm
<300; S2

Water Vapour Transmission Rate, g/(m².day)
V0

Water Transmission Rate, kg/(m².hour0.5)
W0

Crack Bridging
A0

CO2 Permeability
C0

Resistance To Mould Growth
K2

TS EN 1062-1
E5 S2 V0 W0 A0 C0 K2

APPLICATION

SURFACE PREPARATION

The surface of application shall always be free of materials such as form oil, dust, paint, etc.
Moving parts with low adherence shall be moved away from the surface.
Precautions against dusting shall be taken on plastered surfaces.
It shall be used by applying PRIMEL 100® on the gypsum plaster.
You may advance to application after dampening the surface on water absorbent surfaces.

PREPARATION of the MORTAR

A proper water amount shall be put inside the mixing vessel (8.5 l water/25 kg bag).
Powder material shall be added and stirred with hand mixer at low speed.
After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
The mortar prepared shall be applied with a steel trowel.
Application thickness shall be 2-3 mm.
It may be used as final coat plaster on thermal insulation system instead of decorative plaster, and it is applied by a steel trowel, too.
It shall be applied as two coats for thicker applications and the second coat shall be applied when the first coat is set adequately.
You may apply a fine sanding to obtain a smooth surface.

📊
CONSUMPTION

1.0 kg/m² for 1 mm thickness

📦
PACKAGING

25 kg Polyethylene-reinforced kraft paper bags,
(delivered in pallets or as sling-bags upon request.)

💾
STORING

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions
(1 week after opening the package.)

⚠
RECOMMENDATION

No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
Plaster shall not be used again by mixing with water or dry plaster if its application time has expired.
AKFIN® MANTO shall be applied at least 7 days later than the application of the plaster.
We recommend that the application shall be performed between +5°C and +35°C.
AKFIN® MANTO shall be protected against quick drying under windy weather conditions.
It shall not be applied on frozen surfaces.
Do not apply under direct sunlight.
Do not go beyond the application surface and the rules.
Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
For detailed information, please request the security data sheet.
Contact us for your technical questions and for your questions about all other application conditions.