PRiMEL 100®

Acryllic Resin Based Performance Enhancing Primer Used On Absorbent Surfaces

Used as a primer before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc.
It is used as a primer for the prevention surface dusting and protection of cement-based applications (plaster, screed).
It is used for applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications.

Density, kg/l
1

Colour
Blue

Application Time for Second Coat, hours
2

Drying Time, Hours
2

Adhesion Strength, N/mm²
> 1

Before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc., PRIMEL 100® shall be mixed with water at a ratio of 1/1 for the first coat before application, and it shall be applied directly with a brush for the second coat. You may advance to next step when it is dried.
For the prevention surface dusting and protection of cement-based applications (plaster, screed), it shall be applied on the dry surface with a brush by mixing with water with a ratio of 1/3 for the first coat and with water with a ratio of 1/1 for the second coat. You may advance to next step when it is dried.
For applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications, it shall be applied with a brush by mixing with water with a ratio of 1/1. You may advance to next step when it is dried.

Before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc.: Approximately 120 g/m²
For the prevention surface dusting and protection of cement-based applications (plaster, screed): Approximately 100 g/m²
For applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications: Approximately 50 g/m²

3 l and 10 l plastic drums

1 Year Shelf Life*
* If stored in its original package without opening the package under dry, frost free conditions

We recommend that the application shall be performed between +5°C and +30°C.
The application surface shall be dry, clean and free of dust.
It shall be protected from freezing.
All tools used shall be washed with water after application.
When inhaled, it is harmful to health.
Keep away from the children.
Keep it in a container that is closed tightly.
Avoid contact with eye and skin.
Contact us for your technical questions and for your questions about all other application conditions.